Natural Gas Production



Once a well has been drilled and the presence of commercially viable quantities of fossil fuel has been verified, the next step is actually lifting the natural gas out of the ground and processing it for transportation.
Natural gas, as it exists underground, is not exactly the same as the natural gas that comes through the pipelines to our homes and businesses. Natural gas, as we use it, is almost entirely methane. However, when we find natural gas underground, it comes associated with a variety of other trace compounds and gases, as well as oil and water, which must be removed. Natural gas transported through pipelines must meet purity specifications to be allowed in, so most natural gas processing occurs near the well.
This section outlines the process of taking raw natural gas from underground formations and processing it into pipeline quality gas, ready for transportation. Click on the links below to learn about well completion and natural gas processing.Natural gas, as it is used by consumers, is much different from the natural gas that is brought from underground up to the wellhead. Although the processing of natural gas is in many respects less complicated than the processing and refining of crude oil, it is equally as necessary before its use by end users.
The natural gas used by consumers is composed almost entirely of methane. However, natural gas found at the wellhead, although still composed primarily of methane, is by no means as pure. Raw natural gas comes from three types of wells: oil wells, gas wells, and condensate wells. Natural gas that comes from oil wells is typically termed ‘associated gas’. This gas can exist separate from oil in the formation (free gas), or dissolved in the crude oil (dissolved gas). Natural gas from gas and condensate wells, in which there is little or no crude oil, is termed ‘nonassociated gas’. Gas wells typically produce raw natural gas by itself, while condensate wells produce free natural gas along with a semi-liquid hydrocarbon condensate. Whatever the source of the natural gas, once separated from crude oil (if present) it commonly exists in mixtures with other hydrocarbons; principally ethane, propane, butane, and pentanes. In addition, raw natural gas contains water vapor, hydrogen sulfide (H2S), carbon dioxide, helium, nitrogen, and other compounds. To learn about the basics of natural gas, including its composition.
Natural gas processing consists of separating all of the various hydrocarbons and fluids from the pure natural gas, to produce what is known as ‘pipeline quality’ dry natural gas. Major transportation pipelines usually impose restrictions on the make-up of the natural gas that is allowed into the pipeline. That means that before the natural gas can be transported it must be purified. While the ethane, propane, butane, and pentanes must be removed from natural gas, this does not mean that they are all ‘waste products’.
In fact, associated hydrocarbons, known as ‘natural gas liquids’ (NGLs) can be very valuable by-products of natural gas processing. NGLs include ethane, propane, butane, iso-butane, and natural gasoline. These NGLs are sold separately and have a variety of different uses; including enhancing oil recovery in oil wells, providing raw materials for oil refineries or petrochemical plants, and as sources of energy.